Alfa Romeo Mito 1300jtdm 95hp Engine Tuning
Small and beautiful, sporty... Alfa Romeo. This model has been successful and is equipped with a special version of one of the most popular engines in Italy. This 1300 multijet is used on many models of the Fiat group, like Alfa and Lancia, but also on Opel and other brands that you might not suspect! How is this engine designed? It has a 4-cylinder in-line engine with 2 overhead camshafts, 4 valves per cylinder, a turbocharger with variable geometry, and a frontal air-to-air intercooler. The fuel system is a valid common rail with a centralized valve at the top of the head on which the diesel pressure regulator and its sensor are immediately visible (we will come back to this in a moment). As mentioned, this engine is very popular in several power versions (starting from 69hp in the version with fixed geometry turbocharger and waste-gate valve). The Mito is fitted with one of the most powerful configurations, the 95 hp.
Alfa Romeo Mito 1300jtdm 95hp Standard Performance
How does this little diesel-powered sports car perform? Of course, we said that the engine has 95hp at a speed of 3500 rpm with a maximum torque of 200Nm at 1500 rpm. Let's not be misled too much by the indicated rpm, as this engine really seems more suited to stretch towards the medium-high rpms than to recover from lower ones. Despite the small displacement and the relatively low weight (depending on the features, it's around 12 quintals), its top speed is 180 km/h, and its 0-100 acceleration is around 12.5 seconds. This is a bit disappointing for some Alfa fans. But what can be done?
How to increase the performance of the Alfa Romeo Mito 1300JTDm 95hp?
Our catalog contains a customized add-on unit designed to increase the power and torque of your Mito 1300 Diesel. The control unit connects very easily to the engine wiring, and the connectors in the kit are connected simply as an "electrical extension" to the sensor mentioned earlier (the common rail pressure sensor) and the MAP boost pressure sensor. This second sensor is also easily accessible as it is mounted on the intake manifold on the upper part of the engine. As for the other kits mentioned, no modifications are required for the mechanical parts or the engine control unit, as it is not a remapping of the car's ECU. Instead, it is the installation of an external digital electronic control unit that works together with the ECU, thus leaving all the engine safety controls active. The result is an increase in power of 22 horsepower (not a few for a 1300) and 40Nm more torque! Remember that this engine is a bit lazy at low revs. This sluggishness is often criticized by owners of Fiat 500s and Fiat Pandas with similar engines. Yet, the engine seems to like the high part of the rev counter ( with an Alfa, this can work). By installing the additional CHIPBOX control unit, not only do you get a power of 117hp and a maximum torque of 240Nm, but you also get improved delivery at low revs, which allows for greater elasticity, and if you drive correctly, a reduction in diesel consumption.
Alfa Romeo Mito 1300jtdm 95hp Accelerator Pedal Add-On Module
Even for this Alfa Romeo, you will find a kit in our catalog that can be used alone or in combination with the CHIPBOX add-on unit. The PEDALBOOSTER TOUCH kit is a small and advanced electronic add-on module that is quickly mounted on the accelerator pedal position sensor (always with original connectors like the add-on unit). This module does not increase power and torque but increases the responsiveness of the accelerator pedal and, therefore, the engine's response. The result is a Mito that feels better to drive, quicker responding to the driver's commands, and more exciting! The best results can be achieved together with the additional control unit that makes the engine more powerful and robust in terms of torque.
If you want to increase the power and torque of your Alfa Romeo Mito 1300JTDm 95 hp and obtain greater acceleration, increased recovery, and more speed with the possibility of reducing fuel consumption by up to 10%, order your CHIPBOX kit. The elegant SELETRON box will be delivered directly to your home with the best additional digital control unit inside. It arrives already programmed, with high-quality automotive wiring with original connectors for quick assembly and disassembly without leaving a trace. The kit also includes instructions and photos specific for installation in your 1300 Alfa Romeo and all the best Made in Italy technology for ECU tuning. Remember that the kit does not make irreversible changes or leave indelible marks like ECU remapping. It is simply installing an additional electronic
Click here >>>> to improvoce performance in Alfa Romeo Mito 1300JTDm 95cv